Quest_in_OracleDBA: SCAN listener - Troubleshooting connectivity issues with 11grs SCAN

How to Troubleshoot Connectivity Issue with 11gR2 SCAN

I installed the Oracle 11g RAC successfully, But when tried connecting from remote client via SCAN,

it used to raise ORA-12537. This is the most common issues that the happens with SCAN listener.

And there are few common mistakes that generally cause this issue..

So, here is how we can troubleshoot the connectivity issues with SCAN, and cases out the possibilities.

1) Check if Local_listener and remote_listener parameter are set properly on all nodes.

2) The very common issue is with permissions. SCAN will always be created under

grid user (Grid cluserware installation user).

Oracle will also create one local listener “LISTENER” during grid infrastructure installation.

But if that is not present then always make sure that you create a local listener with grid user.

This is required to handover the connection between remote and local listener.

3) Also “oracle” executable should have given to oracle and grid user i.e. 6751.

Under $ORACLE_HOME/bin. If permission are not proper the use root user to

set the permissions. Else it will raise error (ORA-12537, )

-rwsr-s--x 1 oracle oinstall 106M Aug 25 2012 oracle

4) Your database instance is registered with Local Listener?

5) Check if scan config are proper and showing the details similar to :

[oracle@mynode] srvctl config scan_listener

SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521

SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521

SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521

[oracle@mynode] srvctl config scan

SCAN name: sales1-scan, Network: 1/133.22.67.0/255.255.255.0/

SCAN VIP name: scan1, IP: /sales1-scan.example.com/133.22.67.192

SCAN VIP name: scan2, IP: /sales1-scan.example.com/133.22.67.193

SCAN VIP name: scan3, IP: /sales1-scan.example.com/133.22.67.194

6) Check if all above 3 SCAN IPs are responding the ping.

7) Your Oracle Client must be 11g R2 and above release in order to use SCAN functionality.

8) Following is the Oracle Document ID 975457.1. Which helped me for ORA-12537.

Last case was valid for me.

9) If the following all settings are proper then try to enable SQL Net tracing on Client site and

check if the packer size between client and server are compatible.

(This you can confirm by connecting the oracle with normal connection.

i.e. try using SQL>conn user/password@server-ip/oracle_sid.

if this is not working then you need to check packet size on TCP else you have oracle client 11gR2 then you may need to troubleshoot it withhttps://support.oracle.com only J)

How to Troubleshoot Connectivity Issue with 11gR2 SCAN Name [ID 975457.1]

Applies to:

Oracle Server - Enterprise Edition - Version: 11.2.0.1 and later [Release: 11.2 and later ]
Information in this document applies to any platform.

Goal

The goal of this document is to provide checklist when connection through

11gR2 Grid Infrastructure (CRS) SCAN name to database fails.

Solution

Troubleshooting Steps

When client program connects to RAC database through SCAN name,

SCAN listener will accept t he request and redirect the connection to local listener.

To identify connection issue, first try to connect to each local listener through node VIP,

then try each SCAN listener through each SCAN VIP.

To test through node VIP:

sqlplus /@:/

Example:

sqlplus scott/tiger@racnode1-vip.us.eot.com:1521/testsvc

Repeat the same test for all local listener/node VIP in the cluster.

If GNS is used,

node VIP name will be in the format of

nodename-vip.gnssubdomain (example racnode1-vip.us.eot.com)

If connection through local listener fails, check whether service/instance is

registered properly to that local listener with "lsnrctl service ".

To test through SCAN VIP address:

sqlplus /@n

>:/

Example:

sqlplus scott/tiger@120.0.0.205:1521/testsvc

Note it's IP address instead of SCAN name

Repeat the same command for all SCAN IP

If connection through SCAN listener fails, check whether service/instance is

registered properly to that SCAN listener with "lsnrctl service ".

Other client tool (JDBC or such) can also be used to test connection

though sqlplus is preferred for the purpose of testing.

Example Output

Configuration

Below is an example output from a 2-node cluster with the following configuration:

SCAN name and VIP:

nslookup eotcs.us.oracle.com
..
Name:   eotcs.us.oracle.com
Address: 120.0.0.207
Name:   eotcs.us.oracle.com
Address: 120.0.0.205
Name:   eotcs.us.oracle.com
Address: 120.0.0.206

Ping doesn't have to go through if ICMP is disabled but should return

correct IP for corresponding name.

ping -c 1 eotcs.us.oracle.com
PING eotcs.us.oracle.com (120.0.0.207) 56(84) bytes of data.
64 bytes from 120.0.0.207: icmp_seq=1 ttl=64 time=3.37 ms
..

ping -c 1 eotcs.us.oracle.com
PING eotcs.us.oracle.com (120.0.0.206) 56(84) bytes of data.
64 bytes from 120.0.0.206: icmp_seq=1 ttl=64 time=1.85 ms
..

ping -c 1 eotcs.us.oracle.com
PING eotcs.us.oracle.com (120.0.0.205) 56(84) bytes of data.
64 bytes from 120.0.0.205: icmp_seq=1 ttl=64 time=2.45 ms
..

ping -c 1 eotcs
PING eotcs.us.oracle.com (120.0.0.207) 56(84) bytes of data.
64 bytes from eotcs.us.oracle.com (120.0.0.207): icmp_seq=1 ttl=64 time=3.18 ms

Node Public Name/IP Address

Name: eyrac1f.us.oracle.com Address: 120.0.0.111
Name: eyrac2f.us.oracle.com Address: 120.0.0.112

ping -c 1 eyrac1f.us.oracle.com
PING eyrac1f.us.oracle.com (120.0.0.111) 56(84) bytes of data.
64 bytes from eyrac1f.us.oracle.com (120.0.0.111): icmp_seq=1 ttl=64 time=3.36 ms
..

ping -c 1 eyrac2f.us.oracle.com
PING eyrac2f.us.oracle.com (120.0.0.112) 56(84) bytes of data.
64 bytes from eyrac2f.us.oracle.com (120.0.0.112): icmp_seq=1 ttl=64 time=3.37 ms
..

Nodes VIP Name/IP Address

Name:   eyrac1fv.us.oracle.com Address: 120.0.0.211
Name:   eyrac2fv.us.oracle.com Address: 120.0.0.212

nslookup eyrac1fv.us.oracle.com

..
Name:   eyrac1fv.us.oracle.com
Address: 120.0.0.211

nslookup eyrac2fv.us.oracle.com

..
Name:   eyrac2fv.us.oracle.com
Address: 120.0.0.212

ping -c 1 eyrac1fv.us.oracle.com
PING eyrac1fv.us.oracle.com (120.0.0.211) 56(84) bytes of data.
64 bytes from eyrac1fv.us.oracle.com (120.0.0.211): icmp_seq=1 ttl=64 time=4.04 ms
..

ping -c 1 eyrac2fv.us.oracle.com
PING eyrac2fv.us.oracle.com (120.0.0.212) 56(84) bytes of data.
64 bytes from eyrac2fv.us.oracle.com (120.0.0.212): icmp_seq=1 ttl=64 time=1.98 ms
..

Database Name: b2no

Service Name: sno

TNS Connection String

sno =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = eotcs.us.oracle.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = sno)
    )
)

1. Checklist on RAC Cluster Nodes

Prior to the following checking, please set environment variable GRID_HOME to

home of 11.2 Grid Infrastructure installation, for example:

GRID_HOME=/ogrid/gbase
export GRID_HOME

Please note:

* Oracle Network related files (sqlnet.ora, tnsnames.ora, listener.ora etc) are

in $TNS_ADMIN or $ORACLE_HOME/network/admin if TNS_ADMIN is not set.
* This note assumes SCAN VIP and node VIP are all up and

running (can be verified through "srvctl status nodeapps" and

"srvctl status scan" or "crsctl stat res"), troubleshooting of SCAN VIP or

node VIP startup issue is out of scope of this note.

A. SCAN Listener Resource Status

A1. SCAN Configuration:

$GRID_HOME/bin/srvctl config scan

SCAN name: eotcs.us.oracle.com, Network: 1/120.0.0.0/255.255.255.0/eth3
SCAN VIP name: scan1, IP: /120.0.0.206/120.0.0.206
SCAN VIP name: scan2, IP: /120.0.0.207/120.0.0.207
SCAN VIP name: scan3, IP: /120.0.0.205/120.0.0.205

A2. SCAN Listener Configuration:

$GRID_HOME/bin/srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521

A3. SCAN Listener Resource Status:

$GRID_HOME/bin/crsctl stat res -w "TYPE = ora.scan_listener.type"
NAME=ora.LISTENER_SCAN1.lsnr
TYPE=ora.scan_listener.type
TARGET=ONLINE
STATE=ONLINE on eyrac1f

NAME=ora.LISTENER_SCAN2.lsnr
TYPE=ora.scan_listener.type
TARGET=ONLINE
STATE=ONLINE on eyrac2f

NAME=ora.LISTENER_SCAN3.lsnr
TYPE=ora.scan_listener.type
TARGET=ONLINE
STATE=ONLINE on eyrac2f

B. SCAN Listener Status and Service

Log on to corresponding RAC node to find out SCAN listener status and

service once SCAN listener resource status is confirmed. All SCAN listener

should have same service served. Please set ORACLE_HOME environment variable

prior to run any lsnrctl command, for example:

ORACLE_HOME=$GRID_HOME
export ORACLE_HOME

B1. SCAN Listener Status:

$GRID_HOME/bin/lsnrctl status LISTENER_SCAN2
..
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))
STATUS of the LISTENER
------------------------
..
Listener Parameter File /ogrid/gbase/network/admin/listener.ora
Listener Log File /ogrid/gbase/log/diag/tnslsnr/eyrac2f/listener_scan2/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_SCAN2)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=120.0.0.207)(PORT=1521)))
..

B2. SCAN Listener Service:

$GRID_HOME/bin/lsnrctl service LISTENER_SCAN2
..
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))
Services Summary...
Service "b2no" has 2 instance(s).
Instance "b2no1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac1fv)(PORT=1521)))
Instance "b2no2", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac2fv)(PORT=1521)))
Service "sno" has 2 instance(s).
Instance "b2no1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac1fv)(PORT=1521)))
Instance "b2no2", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac2fv)(PORT=1521)))

C. Node Listener Status and Service

C1. Node Listener Status:

$GRID_HOME/bin/lsnrctl status LISTENER
..
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
------------------------
..
Listener Parameter File /ogrid/gbase/network/admin/listener.ora
Listener Log File /home/oracle/app/oracle/diag/tnslsnr/eyrac2f/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=120.0.0.112)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=120.0.0.212)(PORT=1521)))
Services Summary...
Service "b2no" has 1 instance(s).
Instance "b2no2", status READY, has 1 handler(s) for this service...
Service "sno" has 1 instance(s).
Instance "b2no2", status READY, has 1 handler(s) for this service...

C2. Node Listener Service:

$GRID_HOME/bin/lsnrctl service LISTENER
..
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "b2no" has 1 instance(s).
Instance "b2no2", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "sno" has 1 instance(s).
Instance "b2no2", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER

D. Database Service Status

D1. Service Resource Configuration

$GRID_HOME/bin/srvctl config service -d b2no -s sno -a

Service name: sno
Service is enabled
Server pool: b2no_sno
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 2
TAF failover delay: 20
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Preferred instances: b2no1,b2no2
Available instances:

D2. Service Resource Status:

$GRID_HOME/bin/srvctl status service -d b2no -s sno -v

Service sno is running on instance(s) b2no1,b2no2

E. Instance Listener Parameter Setting:

E1. remote_listener setting:

For 11gR2 database

SQL> show parameter remote_listener

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
remote_listener string eotcs.us.oracle.com:1521

For pre-11gR2 database

SQL> show parameter remote_listener

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
remote_listener string (ADDRESS_LIST =(ADDRESS =

(PROTOCOL = TCP)(HOST = 120.0.0.206)(PORT = 1521))(ADDRESS =

(PROTOCOL = TCP)(HOST = 120.0.0.207)(PORT = 1521))(ADDRESS =

(PROTOCOL = TCP)(HOST = 120.0.0.205)(PORT = 1521)))

OR

remote_listener                      string      LISTENERS_SCAN

Note tnsnames.ora must have the following entry for LISTENERS_SCAN

LISTENERS_SCAN =
(ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 120.0.0.206)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 120.0.0.207)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 120.0.0.205)(PORT = 1521))
)

If sqlnet.ora does not contain EZCONNECT in NAMES.DIRECTORY_PATH list,

remote_listener should set to LISTENERS_SCAN as in above example.

E2. local_listener setting:

For Instance1:

For Instance2:

2. Checklist on Client

A successful tnsping to TNS connection string for SCAN doesn't necessarily

mean the connection will be successful, client should be able to resolve to SCAN name,

node VIP name

For supported client version, refer to section "VERSION AND BACKWARD COMPATIBILITY"

of the following:

http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf

A. SCAN Name Resolution

nslookup and ping of SCAN name should return correct SCAN VIP(s),

ORA-12545 could be reported if client can't resolve SCAN name properly

B. Node VIP name:

By default, pfile/spfile parameter local_listener is set to short node VIP name

instead of FQDN name, client need to be able to resolve to short VIP name as

well as FQDN name; for example with following local_listener setting,

client should be able to resolve short VIP name:

SQL> show parameter local_listener

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
local_listener                       string      (DESCRIPTION=(ADDRESS_LIST=(AD
                                                 DRESS=(PROTOCOL=TCP)(HOST=eyra
                                                 c1fv)(PORT=1521))))

ping -c 1 eyrac1fv
PING eyrac1fv.us.oracle.com (120.0.0.211) 56(84) bytes of data.
64 bytes from eyrac1fv.us.oracle.com (120.0.0.211): icmp_seq=1 ttl=64 time=4.04 ms
..

ping -c 1 eyrac2fv
PING eyrac2fv.us.oracle.com (120.0.0.212) 56(84) bytes of data.
64 bytes from eyrac2fv.us.oracle.com (120.0.0.212): icmp_seq=1 ttl=64 time=1.98 ms
..

If client can resolve FQDN node VIP name but not short node VIP name

(client in different domain), ORA-12537 could be reported and pfile/spfile

local_listener need to be adjusted with FQDN node VIP name:

SQL> alter system set local_listener='(DESCRIPTION=(ADDRESS_LIST=

(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac1fv.us.oracle.com)

(PORT=1521))))' sid='b2no1';

SQL> show parameter local_listener

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
local_listener                       string      (DESCRIPTION=(ADDRESS_LIST=(AD
                                                 DRESS=(PROTOCOL=TCP)(HOST=eyra
                                                 c1fv.us.oracle.com)(PORT=1521))))

Once instance updated local_listener setting to listeners, SCAN listener

should have similar output like following:

$GRID_HOME/bin/lsnrctl service LISTENER_SCAN2
..
Services Summary...
Service "b2no" has 2 instance(s).
Instance "b2no1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:4 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)

(HOST=eyrac1fv.us.oracle.com)(PORT=1521)))
Instance "b2no2", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:3 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac2fv)(PORT=1521)))
Service "sno" has 2 instance(s).
Instance "b2no1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:4 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac1fv.us.oracle.com)(PORT=1521)))
Instance "b2no2", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:3 refused:0 state:ready
         REMOTE SERVER
         (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=eyrac2fv)(PORT=1521)))

Note for node1 it's FQDN name but for node2 it's still

short name as node2 is not updated yet

If for some reason, client can't resolve FQDN node VIP name nor short node VIP name,

pfile/spfile local_listener need to be adjusted with IP of VIP name:

SQL> alter system set local_listener='(DESCRIPTION=(ADDRESS_LIST=

(ADDRESS=(PROTOCOL=TCP)(HOST=120.0.0.211)(PORT=1521))))' sid='b2no1';

SQL> show parameter local_listener

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
local_listener                       string      (DESCRIPTION=(ADDRESS_LIST=(AD
                                                 DRESS=(PROTOCOL=TCP)(HOST=120.
                                                 0.0.211)(PORT=1521))))

Quest_in_OracleDBA

Wednesday, May 7, 2014

SCAN listener - Troubleshooting connectivity issues with 11grs SCAN

How to Troubleshoot Connectivity Issue with 11gR2 SCAN

No comments:

Total Pageviews

Labels

Blog Archive

Contact Form

Followers

Wednesday, May 7, 2014

SCAN listener - Troubleshooting connectivity issues with 11grs SCAN

How to Troubleshoot Connectivity Issue with 11gR2 SCAN

No comments:

Subscribe To

Contact Form

Followers